These heavy-duty and rugged horizontal centrifugal pumps are designed, engineered and constructed to handle corrosive, abrasive and other aggressive fluids, as well as those liquids which must remain free of metallic contamination. CHEM-GARD pumps are available in a wide selection of thermoplastic and in ANSI/ISO2858, self-priming, close-coupled and integral pump/shaft motor designs. Their unique sliding front bearing design assures minimum shaft overhang, simplifies maintenance, and allows all types of mechanical seals to be utilised. Vanton’s unique reverse-mounted seal arrangement avoids metal contact with fluid and eliminates need for exotic metal seals. Rated for flows to 330 m3/hr (1450 gpm), heads to 122 metres (400 ft), and for use at temperatures to 135°C (275°F).
Armored construction, moulded plastic casing and impeller, and easy-access seal with sliding bar pedestal design to simplify maintenance.
Standard construction materials include PVC, UPVC, PP PVDF and ECTFE.
The Vanton CHEM-GARD CG design was the first horizontal centrifugal pump engineered from inception to utilise the unique characteristics of thermoplastics. It is not a metal pump made of non-metallics. Design features include molded plastic components, tangential discharge, wide open seal area and retractable front bearing to simplify maintenance and accommodate all popular mechanical seals.
These end suction pumps combine centreline discharge and back pullout construction with the CHEM-GARD wide open seal, sliding bar pedestal design.They meet ISO2858 & ANSI B-73.1 international process pump standards. Metal armoring of the plastic casing and flanges enables these thermoplastic pumps to handle the same nozzle loadings as metal pumps.
All Vanton CHEM-GARD pumps are available with recessed, dynamically balanced impellers, custom sizes and trimmed to suit the shapes, dimensions and physical properties of included solids. CGV pumps are rated for flows to 205 m3/hr (900 gpm) at heads to 73 metres (240 ft), with performance for individual applications dependent on the characteristics of the fluid handled. They can be furnished in the full line of thermoplastics and are designed for clog-free pumping of fluids with soft, hard or stringy materials – even with solids to 75mm (3 inches) in diameter.
The CHEM-GARD CGCC close-coupled, thermoplastic pump sees wide use in clean room applications. It offers a small footprint, and limits fluid contact parts to natural, unpigmented PVDF or polypropylene to avoid contamination, CGCC pumps are often specified by original equipment manufacturers as an integral component on standard systems because they accommodate any C-face motor, and are available in chemically inert thermoplastics at relatively low cost flows to 125 m3/hr (550 gpm) at heads to 67 metres (220 ft).
This heavy-duty, self-priming, centrifugal pump handles flows to 40m3/hr (175 gpm), making it ideal for acid buggies, sump and tank evacuation, and emergency overload pumping. It is often specified for in-line pump service where headroom prevents the use of vertical pumps, and other applications where self-priming from depths to 4.6 metres (15 ft), may be required. These pumps are available in the full line of homogeneous thermoplastics, and the pedestals are inter-changeable with all standard CHEM-GARD models.
Vanton magnetically driven ANSI pumps are ideal for handling corrosive, and hazardous fluids. They are constructed with a dual non-metallic containment can assembly: PTFE for the inner can in contact with the process liquid, backed by a rugged FRP outer can. This innovative design minimises troublesome eddy currents. The pump conforms to Hydraulic Institute Standards and offers an air cooled, dry running, tertiary seal. Flows to 102m3/hr (450 gpm), heads to 85 metres (280 ft)
In the 1950, Vanton developed a revolutionary all-plastic pump for use in conjunction with the first heart-lung device. The design limited fluid contact to only two non-metallic parts: a plastic body block and a flexible liner. This was the birth of our Flex-I-Liner rotary pump. Its self-priming sealless design made it an industry standard for the handling of corrosive, abrasive and viscous fluids as well as those that must be transferred without contaminating the product. Vanton now offers the most comprehensive line of thermoplastic pumps in the industry.
Stay in touch
(+44) 01260 277040
Vanton Pumps (Europe) Ltd.
Unit 4, Royle Park
Congleton CW12 1JJ